Antimony trioxide (Sb2O3) masterbatch is a standard bromine-synergy carrier for flame-retarded polyamide (PA, especially PA6 and PA66) injection-moulded housings requiring UL94 V-0 ratings.
Key formulation and processing points:
- Br:Sb molar ratio: maintain the established ~3:1 window based on bromine content, but re-verify after glass-fibre compensation, since filled PA grades displace polymer mass and shift effective concentrations.
- Carrier selection: use a PA6 or PA66-carrier masterbatch (typically 40–55% Sb2O3 content) so the pellets melt-and-mix in the same temperature window as the base resin, avoiding unmelted specks and weld-line defects on visible surfaces.
- Moisture control: PA is hydrolysis-sensitive; pre-dry the masterbatch with the resin to <0.2% moisture before moulding to prevent molecular-weight drop and embrittlement.
- Thermal-aging checks: Sb2O3 can accelerate degradation at prolonged melt residence; confirm colour shift and mechanical retention after thermal aging trials.
- Particle size: fine grades with D50 in the 0.8–1.5 µm range give smoother surfaces and better burn-through performance in thin-wall parts.
Supplier qualification: per-lot CoA specifying Sb2O3 purity (≥99.5%), D50/D97 particle-size distribution, moisture (<0.3%), and Pb/Fe impurity limits; conduct a moulding trial on V-0 panels before lot release, and retain samples per lot for traceability.