服务热线
18971017202
Flame-retardant TPU films (conveyor skirting, inflatable structures, cable jackets) need antimony trioxide supplied as a TPU or thermoplastic masterbatch, not as dry powder.
Carrier and dosing: Use a polyester-polyol TPU carrier (or low-MFI EVA for hard TPU grades); typical addition is 4-6 wt% Sb2O3 with a Br:Sb molar ratio of ~3:1 against DBDPE or brominated polycarbonate oligomers. Bromine sources must be deca-free compatible to avoid hydrolysis with TPU ester segments.
Processing notes: TPU is highly moisture-sensitive - pre-dry masterbatch together with TPU pellets at 90-110°C for 2-3 h. A fine particle grade (D50 0.8-1.5 µm) keeps calendered and cast films free of white specks; excessive shear can trigger plate-out on chill rolls - monitor roll pressure drop and die lips across the run.
QC and supplier checks: CoA per lot: Sb2O3 purity ≥99.5%, moisture <0.3%, D50/D97 distribution, Pb <50 ppm, Fe <100 ppm. Verify dispersion by ash uniformity (±10% across film width); confirm haze change vs. unfilled film; run LOI/UL94 VTM-0 verification on finished film. Keep a 200 g retained sample per lot for 12 months.