服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for Ceramic Matrix Composites (CMC) Precursor Systems

发布日期:2026-11-21 05:35:02   浏览量:0

Ceramic matrix composites (SiC/SiC, C/SiC) for aerospace hot-section components rely on slurry infiltration and PIP (polymer infiltration pyrolysis) routes, where antimony compounds can serve as oxidation-protection additives; antimony trioxide masterbatch concept extends to ceramic precursor systems as a dispersible additive form.

Application logic: In C/C-SiC oxidation protection coatings and glass-ceramic seal systems, Sb2O3 participates in glass-phase formation and raises oxidation resistance of carbon phases; antimony-based additives also serve low-melting glass seal formulations. For these systems the additive must be introduced as a uniformly dispersed fine-particle phase, not agglomerated powder.

Formulation points: Particle grade D50 0.8-1.5 µm for slurry stability and sedimentation control; dispersion media viscosity and pH affect suspension stability - ball-milling with dispersant is standard; avoid chloride contamination which can cause volatilization during pyrolysis at >800°C.

QC and supplier checks: CoA purity ≥99.5% (chloride and heavy metals limited), D50/D97 distribution, whiteness (affects slurry color-matching), moisture <0.3%. Slurry stability test (sedimentation <5% over 24 h) and pyrolysis trial (mass loss curve, phase composition by XRD) before batch release.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们