服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for Polypropylene Raffia Tape & Oriented PP (OPP) Film Yarns

发布日期:2026-11-21 05:35:03   浏览量:0

Application-focused selection guide for grades of antimony trioxide (Sb2O3) masterbatch used in flame-retardant polypropylene raffia tapes, woven fabric, and oriented PP film yarns for FIBC bulk bags and industrial textiles.

Formulation & Processing Notes

  • Carrier resin: High-MFI PP homopolymer masterbatch carrier (MFI 15–35) matches the high draw-down ratio of raffia tape extrusion and avoids die streaks.
  • Halogen–antimony synergy: Maintain the near-3:1 molar Br:Sb ratio with decabromodiphenyl ethane (DBDPE) adapted to the actual tape gauge; flame spread in a thin oriented tape depends strongly on uniform additive distribution rather than peak loading.
  • Dosage window: Typical 3–5 wt% Sb2O3 on the polymer fraction; overshooting raises melt fracture and reduces tape tenacity after orientation.
  • Pre-drying: Dry masterbatch 80–100 °C for 2–4 h if storage RH > 60%; moisture causes gels and pinholes in thin tape.
  • Orientation step: Screen pack pressure rise indicates agglomerates or plate-out; monitor drawing oven temperature (DBDPE tolerance < 325 °C).
  • Quality checks: Tape tenacity and elongation after drawing, web width uniformity, surface specks, and whiteness consistency per lot.

Supplier Qualification (CoA Verification)

  • Purity ≥ 99.5%; moisture < 0.3%; D50 0.8–1.5 µm fine grade; Pb < 50 ppm, Fe < 100 ppm.
  • Request a per-lot retained sample and annual requalification for long-running bag production.

Compliance

Sb2O3 content is declared per REACH/OSHA hazard communication; confirm RoHS-relevant heavy-metal limits for the end-use market.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们