Antimony trioxide masterbatch is a practical route to flame-retard, soft-PVC weather seals and sealant beads used around window profiles. Unlike rigid profiles, gaskets rely on plasticizer-rich flexible PVC, so carrier choice dominates performance.
Key formulation and QC points:
- Carrier: select a flexible PVC or EVA carrier with a declared plasticizer content matching the gasket compound; mismatch shifts Shore A hardness.
- Loading: dose 3–5% Sb2O3 on the polymer fraction, paired with chlorinated paraffin (Cl:Sb ~3:1) rather than overloading antimony alone.
- Plate-out in dynamic seals: fine grades (D50 0.8–1.5 µm) reduce white bloom on moving sash contact areas.
- Compression set: verify the masterbatch does not raise compression set beyond spec — run 22h/70°C recovery on gasket samples per lot change.
- Weathering: request QUV xenon data; antimony does not discolor, but stabilizer pairing (Ca-Zn vs. lead-free tin) should be re-checked at trial.
Supplier qualification: CoA purity ≥99.5%, moisture <0.3%, Pb/Fe limits, and a two-roll mill dispersion check plus a co-extrusion trial with the rigid profile line before releasing the grade.