服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for SAN/Styrenic Housing Parts: Selection Notes for Injection Molders

发布日期:2026-11-21 05:35:13   浏览量:0

English B2B article — Hubei Zhongti (antimony trioxide masterbatch)

Why SAN and other styrenics need care with antimony trioxide

SAN (styrene-acrylonitrile) and ASA housings for appliances, power tools, and electrical enclosures are often specified flame-retardant when the finished assembly carries a UL94 rating. Antimony trioxide (Sb2O3) works here the same way it does in ABS/HIPS: as a synergist with a brominated flame retardant, at a Br:Sb molar ratio near 3:1 on the polymer fraction. The difference is the melt window: SAN processes at roughly 200–240 °C, so the brominated co-additive must tolerate that temperature without discoloration — brominated epoxy oligomers are the usual choice.

Masterbatch carrier and dispersion checks

  • Match the masterbatch carrier to SAN (styrenic carrier, MFI in the same range as the base resin) to avoid gloss defects and poor wet-out on molded housings.
  • Specify fine-grade Sb2O3, D50 0.8–1.5 µm, for thin-wall housing sections where agglomerates show as white specks.
  • Require a melt-flow comparison: masterbatch vs neat SAN within 10–15%, or expect short shots on complex housings.

Dosing and qualification

  • Typical loading: 3–5 wt% Sb2O3 in the masterbatch-fed formulation, with bromine content adjusted to hold the 3:1 Br:Sb molar ratio after glass-fibre or mineral filler compensation.
  • Qualify with a molded-trial protocol: color (ΔE against control), Izod impact retention, gloss, and a UL94 V-0/V-1 burn test on the final wall thickness — not on a generic plaque.
  • Watch plate-out at the mold surface during long runs; a fine D50 grade and correct carrier reduce bloom and mold fouling.

CoA items to verify per lot

  • Purity ≥ 99.5% Sb2O3; moisture < 0.3%; Pb < 50 ppm; Fe < 100 ppm.
  • D50/D97 particle-size distribution; whiteness for color-critical housings.
  • Retain a 200 g sample per lot for 12 months for dispute resolution.

Sources

  • Halogen–antimony synergy ratio guidance from standard flame-retardancy literature (Br:Sb ≈ 3:1 molar).
  • UL94 small-scale burning classification, current edition.
  • Supplier CoA template: purity, moisture, heavy metals, particle size, whiteness.
在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们