服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb₂O₃ Masterbatch for PVC Garden Hose & Reinforced Non-Kink Tubing

发布日期:2026-11-21 05:35:20   浏览量:0

Audience: PVC compounding & extrusion engineers sourcing antimony trioxide masterbatch for flexible, reinforced garden hose and braided tubing.

PVC garden hose and reinforced non-kink tubing are twin-extruded braided profiles run in long, continuous lengths on high-speed lines. Your Sb₂O₃ masterbatch has to deliver fire performance required by regional hose specifications without disturbing plastisol or flexible-PVC rheology, printability, or kink resistance.

Formulation and Dosage Notes

  • Dose: 3–5 wt% Sb₂O₃ on polymer, calculated to a 3:1 halogen:Sb molar ratio against the chlorine already in PVC plus chlorinated paraffin co-additive (CP-52/70) where used. Overdosing raises hardness and stiffness in thin-wall flexible hose.
  • Carrier: flexible PVC or plastisol-compatible carrier; declare plasticizer type and content (DINP/DOA) so it matches the hose compound and keeps Shore A in spec.
  • Grade: fine D50 0.8–1.5 µm to avoid white specks and surface bloom on clear/translucent hose, and to survive braiding without grit lines.
  • Pre-dry masterbatch stored above 60 % RH before extrusion; moisture drives haze and voids in flexible PVC.

Processing Watchpoints

  • Keep melt temperature ≤ 190 °C; Sb₂O₃ can accelerate plate-out on the die and vacuum ports at sustained high temperature, appearing as gray-white deposits that mark the hose surface.
  • Monitor die pressure and screen pack; plate-out correlates with rising pressure.
  • Braided-braid cover uniformity hides color drift; run a short trial length and check both wall brightness and print adhesion.

Inbound QC and CoA Checks

  • Sb₂O₃ purity ≥ 99.5 %; moisture < 0.3 %; Pb < 50 ppm; Fe < 100 ppm.
  • D50/D97 particle-size distribution documented per lot, with whiteness consistency for color-critical hose.
  • Migration screening for potable-water-contact or drinking-water-adjacent hose where regulations apply.
  • EN 13501-1 or local hose fire-class data at the target wall thickness, verified on the finished hose.

Supplier Qualification

Retain a 200 g sample per lot for 12 months and run an annual requalification against the original CoA. For continuous long runs, confirm lot-to-lot whiteness and particle-size consistency before committing the full hose campaign.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们